Close MenuGoulds 3 HP 1 Phase 230V centrifugal Self-Priming Pump
Goulds 3 HP 1 Phase 230V centrifugal Self-Priming Pump is designed so that once the pump is primed it never needs priming again, even if water level drops below the end of the suction pipe. Pumping resumes once the water level rises above the end of the suction pipe. Specifically designed for lawn sprinkling, irrigation, air conditioning systems, heat pumps, water transfers and dewatering. Pump body has a cast iron casing. Pump has Stainless Steel wear ring for longer life and resistance to wear. Impeller is F.D.A. compliant and glass filled Noryl.
>>>> Application:
Water Systems
>>>> Features:
Shaft: Uses Motor shaft, 300 Series Stainless Steel
Shaft Seal: Standard Mech. Seal is Buna/Carbon/Ceramic/S.S, Casing "O"-Ring is Buna
Ports: 1-1/2" NPT Inlet x 1-1/2" NPT Discharge
1/2HP PUMP GOULDS
The Goulds LB0512 booster pump can achieve up to 20 GPM at 3500 RPM, and is perfect for use at your car or pressure washing business. It has a single phase, 0.5 HP motor and open drip proof motor enclosure design. A 115/230 volt electrical connection is required for operation.
Part of the LB series
Maximum flow: 20 GPM
Maximum pressure: 85 PSIG
Maximum speed: 3500 RPM
Maximum temperature: 140? F
0.5 HP, 60 Hz
Single phase
4.5" Noryl impeller
Open drip proof motor enclosure
Stainless steel casing
115/230 volts
Suction: 1.25" NPT
Discharge: 1" NPT
Heads to 190 feet
Goulds item #LB0512
